Editing Blog/2026-01-11/Modeling With Claude (section)

=== Clumsiness ===

The magnets are tiny! 3 mm x 1.5 mm is very small, and my tweezers were magnetic which makes the whole thing annoying because the magnet will flip over trying to stay with the tweezers rather than stick in the plastic. I used a little flat cardboard box to rub and push the magnets in place, which worked well.

What didn't work well was showing Julie the magnets and then dropping one. It took us 5 min to find it again but we absolutely had to find it since it was in the living room where Astra does play.


{{#seo:|description=The author uses the AI assistant Claude to model a 3D print for a Power Grid card display, exploring the benefits and limitations of using Claude for this task.}}

[[Category:Blog]]
[[Category:AI]]
[[Category:Modeling]]